Bespoke Steel Bunded Tank

Bespoke Steel Bunded Tank - Free No-Obligation Quotation
 
Need a size not listed on our website? No problem, let us know what you're looking for and we'll quote you for us to make it! The tank will be designed with meticulous attention to detail and crafted from high-quality British sourced materials. We are proud to say that we will make this tank ourselves, ensuring that every aspect of the production process is held to the highest standards and to your individual specification. 
 
How to build your tank:
Specify your requirements and build your tank using the options to the right of this page and proceed with your order. Someone from our dedicated team will respond with a quote! Please note, you will not be charged at checkout for our bespoke tanks- see below regarding payment. 
 
Offloading:
Please note, all tanks are sent through an approved pallet network. Tanks are delivered on curtain sided wagon. It is your responsibility to offload the tank from the vehicle, therefore a forklift truck or telehandler is required. If you do not have access to a forklift truck or telehandler, selected "No" when asked "Do you have suitable offloading". If you do not have suitable offloading, we can offer HIAB or tail lift delivery- someone from our team will discuss these options with you. 
 
How will we quote you:
Once we receive your requirements, someone from our expert team will contact you via the email you provided to offer you a quote. If you are satisfied with our quote, please indicate acceptance of our quote by response. We will then proceed to book your order onto our system and contact you for payment. Typically we would only require a deposit ranging from 10-25% to accept the order. The remaining balance would be payable prior to dispatch. 
 
Upon Checkout:
Please ensure you enter the billing details of where the tank would be charable to, and the delivery address of where the tank will be delivered to in the delivery section, if different from the billing address. 
 
How we take payment:
In your quotation, we will specify our payment terms. Typically, we would ask for payment before your order reaches the production stage- in most cases, we will require a deposit, varying from 10-25% depending on the materials required. We accept payment by card over the phone, BACS transfer or Cheque*.
*Cheque payments must first be cleared by the bank before production is started.
 
How to complete bespoke tank form:To ensure we get the correct details, please carefully read the explanation below of information we require and complete the form on the right.
Channels: We would always recommend channels on the base of the tank to allow air to circulate. You can choose to have channles lengthways, widthways or none (not recommended). 
Fitting Kit: We sell a great range of fitting kits. If you require a fitting kit, please select the one required, or select no fititng kit if not required. If you're unsure which kit is required, all our kits are available on our store page or give us a call. 
Gauge: A gauge is used to display your fuel level. We offer a float gauge, which is a clock type gauge that sits ontop of your tank, or a electronic Watchman Sonic Adavanced, which can be plugged into a wall socket up to 200m to display your fuel level. 
Security Requirements: To ensure your fuel is safe, a security hatch can be added onto the tank, which is a lockable steel lid which covers the fill point and gauge. 
Offloading: If you have a forklift truck or telehandlers available to offload the tank from the wagon, select yes; if not, select no and we'll contact you with delivery options.
Maximum size restrictions: this is the size you want the tank made to. We will quote on a tank to your size specified. Please note, OFTEC regulations stipulate the tank must have 300mm clearance on all sides. Therefore, you should minus off 600mm from the length and width. 
Any other requirements: this could be more technical requirements if they're required. For example, Spillstop, dropdown fills (for tall tanks), extra gauge ports, suction pipe, top outlet, steel thickness, etc. 
 
General Tank Description:
Designed to comply to the oil storage regulations when permanently connected to an appliance (boiler or pump).  Ideal for domestic heating oil and is a direct replacement for many single skin oil tanks.
 
This bunded oil tank is a testament to the quality and craftsmanship of British manufacturing. With over 60 years of experience in the industry, we have poured our heart, soul and knowledge into creating a product that is both elegant and functional.
 
Crafted with meticulous attention to detail and using only the finest materials, this tank is designed to provide you with peace of mind and long-lasting durability. The bund design ensures that any spills or leaks are contained, making it an environmentally friendly choice for your home or business.
 
Invest in this high-quality and reliable oil tank today and enjoy the benefits of a product that is built to last.
 
Standard Features:
Made from British sourced high-quality 2.5, 3, 4, 5 or 6mm thick steel
Pyramid roof
1" outlet
2" top fill point with cap and chain
Security hatch (optional)
Bund vent
Lifting eye
Channels on the base lengthways (please specify if channels are required widthways).*
Painted in dark green as standard (other colours available upon request)
Small tin of touch-up paint supplied with the tank
10-Year warranty
20-year+ life expectancy when properly installed and maintained
All tanks are subjected to quality control and pressure testing to guarantee serviceability
Made in general accordance with BS799 Part 5 and BS5410
 
*If channels are not required, please specify.
 
These tanks are all made to order so if you would prefer alternative outlets or inlets, please call us on 01772 338892, or email info@jseed.co.uk, as these can usually be done for no extra cost.  
 
 
All our steel tanks are made to order. While we attempt to speed this up where possible, most tanks are usually dispatched within 6-8 weeks (800litres to 1600litres bunded, and single skin tanks, are typically dispatched quicker). Tanks over 5,000litres will take longer. Within your quote will be an accurate lead time. 
 
All tanks should also be dipped annual for water and if any is found to be present, it must be removed straight away.  All tanks are pressure tested for leaks on manufacture and come with a 5-year guarantee if installed and maintained correctly.  Any chips to the paintwork on the installation must be touched up with the tin of touch up paint provided.