Deso LP1230T Single Skin Low Profile Oil Tank
DESO 1230 Litre Single Skin Oil Tank, bottom outlet, optional extras available.
- Capacity: 1230L (270gal)
- Length: 1900mm (6’3″)
- Width: 1240mm (4’1″)
- Height: 860mm (2’10”)
- Weight: 55Kg
- Footprint: 1050mm x 1750mm (4’7″ x 5’9″)
DESO Oil Tanks are rotationally moulded out of premium grade, oil resistant MDPE and are suitable for central heating oil storage and kerosene oil storage.
Every oil tank comes with the following:
- Lockable lid
- Universal gauge fitting port
- Forklift access point
- 2 year warranty
- 1” BSP bottom outlet as standard (top outlet available on request)
When any existing oil tanks come up for replacement or new tanks are installed they must be installed to the current building regulations for oil tanks. These look at two specific areas, the first being the Environmental requirements and you may need a bunded oil tank and the other area is fire protection as oil tanks must be positioned at certain distances from buildings and boundaries.
Single Skin Oil Tanks
Single skin oil tanks can only be fitted for heating oil if they pass T/133 risk assessment and are for domestic heating oil purposes only. Deso single skin oil tanks should not be fitted with a gravity feed kit for dispensing of diesel unless they are fitted within a bund designed to contain 110% capacity of the oil tank. Since March 2016 single skin oil tanks should not be fitted in Wales and it is now an offence for an oil company to fill a single skin oil tank fitted after this date.
Deso oil tanks also comply with Oftec OFS T100 and are CE marked with is now a legal requirement for plastic oil tanks sold in the UK.
They are also suitable for water storage (non-potable) and several chemicals, please contact us for more info.
Measurement Specification
DESO 1230 Litre Single Skin Oil Tank, bottom outlet, optional extras available.
- Capacity: 1230L (270gal)
- Length: 1900mm (6’3″)
- Width: 1240mm (4’1″)
- Height: 860mm (2’10”)
- Weight: 55Kg
- Footprint: 1050mm x 1750mm (4’7″ x 5’9″)
Installation
All plastic oil tanks MUST be fully supported across the entire base by either concrete or flags.
Please note that all Oil Tanks should only be installed by a suitably competent person e.g. an OFTEC Registered Oil Tank Installation Technician in accordance with supplied instructions and statutory requirements.
We offer an installation service that covers the North West of England. To find out more, contact our office for a free no-obligation quotation.
Alternatively, to find an OFTEC Registered Installation Technician in your area, click here.
To see OFTEC Regulations, click here.
Delivery Information
Prices displayed for this item are inclusive of delivery to addresses in England and Wales only. Delivery to Scotland, offshore addresses, Highlands, Islands and Northern Ireland including postcodes PA,PH,DD,AB,IV,KW & BT may be available, please contact us with your postcode for a price. This is subject to access for an articulated lorry. If access to your address is restricted please advise at the time of placing your order to allow for the arrangement of a smaller delivery vehicle.
Please note it is the customer’s responsibility to arrange for the tank to be offloaded from the delivery vehicle to the customer’s premises. Please allow up to 10 working days for delivery.
Tail lift offload usually available down to curbside.
HIAB Delivery and Tank Positioning available to the North West of England at an additional cost. Contact our office for more information.
Deso plastic oil tanks are usually delivered within 5 working days, but next day delivery is available for no extra cost of many tanks but these must be ordered before 11.20am and please phone prior to ordering to check availability.